| Whakaahuatanga | Kowiri tira Kowiri tira ngongo ngongo | ||
| Rauemi&Paerewa&Rahi | Rauemi: 201,202,301,304,304L,310S,316,316L,321,347 Paerewa:ASTM (ASME) SA / A312 /A213 /A269 ,DIN,JIS,EN | ||
| Diane ki waho:Φ6mm-25mmWall Thickness:Φ0.7mm-2.11mm Whakaaetanga:OD:±0.08mm, WT:±10% | |||
| Te roa | E ai ki nga rahi rereke, ko te roa o te porowhita kotahi kei roto i te 500 mita te ngongo porowhita katoa kaore i te waahi paiherea | ||
| Maimoatanga Mata | Pickling, Polish Annealed ranei | ||
| Hangarau | Te huri matao i te tuatahi, katahi ka kumea te matao | ||
| Momo Tukunga | Ngohe | ||
| Momo | Kore me te Welde | ||
| Taupānga | Ko nga ngongo kowiri tira kowiri e whakamahia nuitia ana i roto i te Keri Hinu, Te Maama, Te Ahumahi Hanga Rehu, Te Whakawhiti Wera me te Ahumahi Maama Whakaoho Whakaoho, Paipa Hau etc | ||
Kōeke Kowiri tira
| Hangahanga matū | Hangahanga Rawa | 201 | 304L | 304 | 316 | 316L |
| C | ≤0.15 | ≤0.03 | ≤0.08 | ≤0.08 | ≤0.03 | |
| Si | ≤1.00 | ≤1.00 | ≤1.00 | ≤1.00 | ≤1.00 | |
| Mn | 5.5-7.5 | 7.5-10 | ≤2.00 | ≤2.00 | ≤2.00 | |
| P | ≤0.06 | ≤0.035 | ≤0.035 | ≤0.035 | ≤0.035 | |
| S | ≤0.03 | ≤0.03 | ≤0.03 | ≤0.03 | ≤0.03 | |
| Cr | 16-18 | 18-20 | 18-20 | 16-18 | 16-18 | |
| Ni | 3.5-5.5 | 8-12 | 8-10.5 | 10-14 | 10-14 | |
| Mo | 2.0-3.0 | 2.0-3.0 | ||||
| Taonga Miihini | Kaupapa Rawa | 201 | 304L | 304 | 316 | |
| Te Kaha Toka | ≥535 | ≥520 | ≥520 | ≥520 | ||
| Te Kaha Tuku | ≥245 | ≥205 | ≥205 | ≥205 | ||
| Toronga | ≥30% | ≥40% | ≥35% | ≥35% | ||
| Maama (HV) | <253 | <200 | <200 | <200 | ||
Wā tuku: Hānuere-20-2023